Exploring photocatalytic tetracycline removal performance under simulated sunlight irradiation: Milling time effect on metallic reduction of MnO/ZrO2 mixed oxide

Abstract

In the present research, it is reported that ball milling technique can be applied to enhance the photocatalytic properties of MnO and ZrO2 metal oxide powders (MZOx) furthermore the fabricated photocatalyst can be used for the degradation of tetracycline (TTC). XRD analyses revealed that increasing the milling time resulted in the formation of a pure metallic Mn crystal phase, which boosted the antibiotic degradation rate. It was confirmed by SEM technique that the morphological structures of the particles were generally small and uniform. The band gap energy was calculated as 3.70 eV for the hybrid metal oxide. Additionally, the adsorptive and photoluminescence features were illuminated via DRS and PL analyses. The effect of milling time had a major impact on the photodegradation rate of TTC, and the 8 h milling sample (MZOx-8h) exhibited the highest catalytic degradation activity (79.4 %). Low photocatalytic activity was obtained at acidic pHs and increased at alkaline pHs. The presence of H2O2 sharply decreased photocatalytic process time (60 min) and 94.3 % of the TTC was degraded at 7.5 mM H2O2. The photocatalytic degradation process proceeded through superoxide radicals and was supported by holes. The stability of MZOx-8h almost remained constant (70.02 %) even after seven cycles. It was determined that the presence of oxalic acid positively affected the progress of TTC degradation reactions. Further, practical application areas were investigated and MZOx-8h doped on support materials was found to be suitable for such applications in proportion to the doping ratio. Finally, it was demonstrated that MZOx-8h exhibited remarkable performance in photocatalytic reactions of different types of organic pollutants. The synergistic nature of MnO and ZrO2 with the contribution of ball milling time effect resulted in high photocatalytic activity.